Grab Hire Explained: What It Is and When It Beats a Skip

Key takeaways

  • Grab hire is a lorry with a hydraulic arm that loads waste from your site in one visit, ideal for bulk soil, rubble and hardcore.
  • It reaches over walls and needs no permit, so tight access and roadside placement are not blockers.
  • Earthworks UK runs 6-wheeler and 8-wheeler grabs; the 8-wheeler is the most popular for demolition work.
  • One 8-wheel grab load carries around 16 tonnes, roughly 3 to 4 builders’ skips.
  • For large heavy loads, grab hire is usually faster and cheaper per tonne than multiple skips.
  • We are based in Thornbury and serve Bristol and the South West, including Thornbury, Yate and Wotton-under-Edge.

Grab hire is a lorry fitted with a hydraulic grab arm that loads waste directly from your site and takes it away in one visit. It’s built for bulk loose material, awkward access, and jobs where you’d rather not deal with a skip permit at all. To discuss a job, get a quote or call 0117 982 8265.

What is grab hire

The grab arm loads waste straight from the ground, without you needing to carry or barrow anything to a container. Because it can reach over walls and fences, tight access isn’t the blocker it would be for a skip delivery. And because the lorry loads and leaves in one visit, there’s no container left behind and no permit required. Our grab hire service covers Bristol and the South West for domestic and commercial customers.

Our grab lorry hire fleet

VehicleHeightWidthLengthBest for
6-wheeler grab12ft9ft26ftSmaller loads
8-wheeler grab12ft9ft32ftOur most popular grab for demolition jobs

One 8-wheel grab load carries around 16 tonnes, roughly the equivalent of three to four builders’ skips. Check the lorry’s length and height against your access before booking, and tell us about any overhead cables, narrow gateways or soft ground.

When grab hire beats a skip for site clearance

  • Large volumes of loose soil, rubble or hardcore
  • Awkward access, no dropped kerb, or loading over a wall
  • No permit needed, and no manual carrying to a skip
  • One load replacing several skips, often working out cheaper per tonne for heavy waste

For the full side-by-side comparison of skip, grab and muck away, see our grab hire vs skip hire guide. If your job suits a container you can fill at your own pace instead, skip hire is usually the simpler route. If you have no room to leave a skip but waste you can load by hand, a wait and load skip may suit.

What grab hire is used for

Grab hire is a regular fixture on demolition clearance, site strips and excavation arisings. It also covers muck away of spoil and hardcore where a tipper isn’t the right fit for the access. Our guide to what muck away means explains the term.

What to tell us when you book

  • The material and roughly how much of it there is.
  • The address and postcode, and how the lorry will reach the pile.
  • Any height or width limits, such as gateways, cables or parked cars.
  • The date you need it collected.

How a grab hire visit works

The lorry arrives at your site and the driver positions it so the grab arm can reach the material. The arm loads the waste into the lorry body, and the lorry leaves with it in the same visit. Nothing is left on your driveway or the road afterwards. Because the driver needs a clear approach and room to work, it helps to keep the area around the pile free of parked cars, and to mark out anything the arm must avoid.

Domestic and commercial jobs

Grab hire is not only for large building sites. Homeowners use it for a driveway dig-out, a garden clearance or leftover rubble from an extension. Builders, groundworkers and landscapers use it for site strips and excavation arisings. In both cases the question is the same: is there enough loose, heavy material to justify a lorry, or would a skip do the job at your own pace?

Where we cover

We are based in Thornbury and serve Bristol and much of the South West. Around us, that includes:

  • Thornbury and the villages nearby, such as Alveston, Olveston, Oldbury-on-Severn, Aust and Pilning.
  • North Bristol, including Bradley Stoke and Filton.
  • Yate, Chipping Sodbury, Frampton Cotterell and Winterbourne.
  • Patchway and Almondsbury.
  • Wotton-under-Edge, Charfield, Dursley and Berkeley.

Our transport and recycling depot in Thornbury also takes smaller loads from small tippers and vans. If your job suits a skip, see the pages for Thornbury, Yate and Wotton-under-Edge.

Get a grab hire quote

Heavy load or tight access? Grab hire is usually the quickest, cheapest route. Get a grab hire quote to understand what Earthworks UK offers and how it compares.

FAQ

What is grab hire?

A lorry fitted with a hydraulic grab arm that loads waste directly from your site and takes it away in one visit.

How much can a grab lorry carry?

An Earthworks UK 8-wheel grab carries around 16 tonnes, roughly the equivalent of three to four builders’ skips.

Is grab hire cheaper than a skip?

For large volumes of heavy loose material it usually is, because one load replaces several skips and there’s no permit or manual carrying involved.

Do I need a permit for grab hire?

No. The lorry loads and leaves the same visit, so nothing is left on the road and no permit is required.

What can grab hire remove?

Bulk loose material such as soil, hardcore, rubble and green waste, from demolition, site strips and excavations.

Who is grab hire for?

It suits domestic jobs as well as commercial clients, from one-off clearances to regular site work.

Do you cover Thornbury, Yate and Wotton-under-Edge?

Yes, we serve all three, along with the villages around them and North Bristol. Tell us your postcode and we will confirm what is available at your address.

How big is a grab lorry?

Our 6-wheeler grab is 12ft high, 9ft wide and 26ft long. Our 8-wheeler grab is 12ft high, 9ft wide and 32ft long.

Which grab lorry is most popular?

The 8-wheeler is our most popular grab for demolition jobs.

Can a grab lorry reach over a wall?

Yes. The hydraulic arm can load over walls and fences, so tight access is usually not a blocker.

What is the difference between grab hire and tipper hire?

Both can carry out muck away. A grab lorry loads with a hydraulic arm, which suits awkward access and loose piled material, while our 8-wheel, 32-tonne tippers handle bulk loads.

What happens to the material a grab lorry removes?

It goes to licensed facilities, where inert soil and hardcore can be screened and reused as recycled aggregates and topsoil.

Do I need to be on site when the grab lorry arrives?

Make sure the lorry has clear access to the material and that someone can confirm what is to be removed. Tell us about gateways, cables and parked cars when you book.

How do I book grab hire?

Use our online booking form or call 0117 982 8265, and tell us the material, the amount, the address and how the lorry will reach it.

Related Content

Grab Hire vs Skip Hire Guide 2026 (Bristol & South West)

Grab Hire vs Skip Hire Guide 2026 (Bristol & South West)

Grab hire and skip hire are two main methods for waste disposal in the UK. If you have a project…
Garden Makeover Waste Plan: How to Handle Your Garden Waste in Bristol

Garden Makeover Waste Plan: How to Handle Your Garden Waste in Bristol

Key Takeaways A garden makeover in the Bristol area can easily generate 1–3 tonnes of mixed garden waste, soil, and…
Builder's Waste Checklist for Jobs on Site (Bristol & South West)

Builder's Waste Checklist for Jobs on Site (Bristol & South West)

Whether you’re stripping out a kitchen in Horfield or running a multi-plot development in Emersons Green, waste that isn’t planned,…